Descaling Units / Oil Cooler Cleaning Units

Descaling units and oil cooler cleaning units from Glogar are used for system cleaning and descaling of cooling circuits, as well as for cleaning temperature control units and in tool cleaning.

For companies that are not equipped with a cooling water treatment system, it is recommended to clean the entire cooling circuit at least once a year to prevent the cooling capacity from decreasing or becoming uneven. This proactive measure helps avoid consequential problems in the production process due to limited cooling capacity. Descaling units from Glogar provide a remedy. Temperature control units and tools used in manufacturing and plastics processing should also be cleaned and descaled regularly.

A descaling unit / oil cooler cleaning unit performs this task quickly and efficiently.

Open recirculating cooling systems, in particular, suffer from the continuous introduction of solid particles via the cooling tower. Depending on the operating conditions and make-up water quality, this leads to the accumulation of lime, rust, organic particles, etc. To prevent sludge formation in the system and to restore optimal cooling temperatures, system cleaning using oil cooler cleaning units is urgently required.

A system cleaning of the entire cooling circuit should also be carried out before the use and commissioning of a dosing station. Only material-compatible and environmentally friendly descaling agents are used in the descaling units for cleaning.

Systems for cleaning service and descaling service

Cooling zones in injection molding machines/extruders, cooling rollers, heat exchangers and tools are cleaned and descaled. Total blockages are removed at short notice.